Using a pencil like a pro

by
pencil
Photo, rutty

I know that my students (or I) are practicing badly when their sheet music remains in mint condition week after week. A good practice session involves lots of small successes and breakthroughs, many or most of which will be forgotten by the next practice session. Using a pencil is the obvious but somehow frequently-overlooked way to make sure tomorrow’s practicing builds on today’s successes, instead of repeating or rehashing.

It’s a mistake to think that pencil marks are amateurish or a crutch. Musicians in professional situations often have to learn music with little lead time or rehearsal, and a pencil is a professional-grade tool for making music with accuracy and poise. The most effective pencil usage depends on a couple of prerequisites:

  1. Have one. It’s embarrassing, unprofessional, and time-wasting to be caught without a pencil. Buy yourself a bulk package of cheap mechanical pencils, and stash them everywhere: Pockets, purse, instrument case, sheet music folder, gig bag, desk, reedmaking table, teaching studio. Tie one to the music stand in your practice space. Every so often, restock each space, since, if you’re like me, pencils seem to have a way of wandering off to be discovered later in the laundry.
  2. Read. If you’re the kind of player that tends to ignore markings printed in the part, then you probably won’t pay much attention to pencil marks either. Become a meticulous follower of written instructions. (If you don’t like the printed instructions, use your pencil and your well-informed artistic judgment to change them, then obey your pencil marks.)

Good pencil markings are clear, concise, efficient, and preferably easily understood by someone else at a glance. I find circles, stars, and highlighting to be so vague as to be pointless; don’t bother making a mark unless it’s adding information to the page. Most common woodwind fingerings can be readily identified with a letter or two (such as “S” for a side fingering or “L” for a left-hand fingering). Develop a vocabulary of markings and use them consistently, so that ultimately you can read them as quickly and accurately as you can read notes. If your sheet music is looking a little too pristine, ask yourself if your playing might benefit from having any of the following information right there on the page:

Read more

Getting an “outsider” opinion

by
bassoon
Photo, Pirate Scott

Saxophones, more than many other instruments, have a tendency toward mechanical noise: clicks and clanks are a hazard of the relatively large keys and articulated mechanisms and of the relative popularity of “vintage” instruments. Much of the noisiness can be solved by a good technician, but it’s sometimes surprising how much key noise saxophonists tolerate on their otherwise pristine recording projects.

The oboe has a particularly sensitive mechanism involving the right index finger and a linkage between the upper and lower joints. It requires a great deal of finger precision to avoid unwanted “blips” (brief, unintended notes) when moving between, say, A and C. If you are listening for that sound, you will find that it is not uncommon, even on recordings that are technically impressive in other ways.

I think a lot of saxophonists would be scandalized by “blips” in each other’s playing, and oboists would be equally appalled by rattling, clanking keywork. But it is easy to become accustomed to hearing those sounds in our own playing, and to stop really noticing them.

Read more

Three Fingering Diagram Builder tutorials

by

Back in the olden days (2002), I wrote a paper for a college class on Rahsaan Roland Kirk’s simultaneous playing of clarinet and saxophone on “Creole Love Call” from the 1967 album The Inflated Tear. (When I started up this blog, the paper retroactively became a blog post.) In my paper, I included two fingering charts—one for right-handed clarinet, one for left-handed saxophone—that I thought looked pretty good and only took me a few hours to make. Ah, how young I was.

Right-handed clarinet fingering chart. Click for larger.
Left-handed saxophone fingering chart.

Clearly, the time has come to update these sad old charts, and the Fingering Diagram Builder makes it fast, easy, and, dare I say it?—fun. I’ll show you how it’s done, using three particularly cool features (if I do say so myself) of the FDB. We will take a look at the FDB’s custom styles, custom keywork presets, and Dropbox integration.

Custom styles

For now, my plan is just to create enough diagrams to replace the ones in these old fingering charts—just the fingerings I figure Kirk must have used. But I don’t think Rahsaan would want me limiting myself to just those fingerings in the future. I’d better set up this project in such a way that I can come back later with new one-handed fingerings I’ve discovered, and add them to the charts with a minimum of fuss.

The problem is that, what with the FDB’s highly customizable diagrams, I may not remember tomorrow whether the ones I made today have lines that are “medium” or “thick” or “heavy,” or whether I sized them “small” or “tiny,” or whether I was saving the diagrams as .PNG files for onscreen use or .TIF files for better printed results. The FDB does, of course, remember my current settings between sessions all on its own, but I like to work on several projects at once (Rahsaan would approve, I think) and I’ll use the FDB’s “custom styles”  to keep each project’s configuraton a click away. Here’s how:

  1. First I will set up things just the way I want them. Currently, settings that can be saved as part of a custom style are: diagram size, line thickness, color, file naming procedure (let the FDB name them automatically, or specify each filename myself), file format, save-to location (my computer or my Dropbox), and, if I’m using Dropbox, which folder to save the files in.
  2. Once everything is just right, I’ll click over to the “Custom styles” tab in the FDB’s menu to review my choices, and select which ones I want to save.

    As you can see, I’ve set the diagrams to be small, heavy-lined, colored in gray, .PNG-formatted, and saved to Dropbox in a folder called “kirkismyhero.” I have un-checked the box for “File naming,” since I don’t want the FDB to remember that for my purposes on this project—I’ll just go ahead and use whichever system I’m already using that day.
  3. I’ll type in a name (“kirk project”) for my custom style, and click the “Save current settings” button (or press Enter).

    I’m done—that’s all there is to it. In the future, whenever I want to create more diagrams like the ones I’m making today, I can just go to the “Custom styles” tab and click on “kirk project.”

Read more

Recorder notation vs. band/orchestral woodwind notation

by

At the request of a reader, I’m going to try to clarify some things about notation for recorders. (I touched on it previously in an article about woodwind key nomenclature systems.)

Those of us who play modern band/orchestral woodwinds are familiar with a system in which, within a family of instruments, a notated pitch always corresponds to a certain fingering. No matter how large or small the instrument, the same fingering always corresponds to that same written pitch, even though the smaller instruments produce higher sounding pitches and the larger instruments produce lower sounding pitches. For example:

E-flat clarinet B-flat clarinet A clarinet Bass clarinet
Notated pitch
Fingering
Sounding pitch

This is convenient for clarinetists because, essentially, they only need to learn one set of fingerings to be (in that respect) prepared to play any instrument in the clarinet family. Note also that even the bass clarinet is notated in treble clef, as are its even lower cousins. All the major modern woodwind families (flutes, oboes, clarinets, bassoons, and saxophones) use this approach: consistent clefs, and consistent correspondence of notated pitch to fingering. The transposition is a function of the instrument’s size.

Because of the prevalence of this system in the Western woodwind tradition, it’s an understandable error to assume that the recorder family is notated in the same way. But recorders typically use a different system, in which each instrument is notated in concert pitch, and the fingerings change depending upon the instrument. Or, to be more precise, each instrument is notated in a sort of “concert pitch class,” since some of the recorders are notated as transposing by one or more octaves, but a notated C always produces a sounding C. Bass recorder and lower are notated in bass clef. Here are the most common ones:

Descant (“soprano”) recorder Treble (“alto”) recorder Tenor recorder Bass recorder
Notated pitch
Fingering
Sounding pitch

Recorder players must learn two sets of fingerings, one with the instrument’s lowest note being C (for descant and tenor recorders), and one with the instrument’s lowest note being F (for treble and bass recorders), and must be prepared to read in two clefs.

Read more

Fingering Diagram Builder, version 0.4

by

Hello, friends. I’m excited to share the latest round of improvements to the Fingering Diagram Builder. Thanks to all for your suggestions and bug reports, for your donations (every little bit helps), and for sharing with me some of the cool things you are making with the fingering diagrams.

A few names that need mentioning for recent extra-awesome support and/or ideas are bassoonist Dave Wells (check out his high-quality and handsome bassoon fingering charts), saxophonist/doubler Evan Tate, saxophonist Bart Walters (who blogs over at Music Collective), pianist Jason Gray, and clarinetists Kellie Lignitz and Rachel Yoder (who included the FDB in their column in The Clarinet and on Clarinet Cache). You internet people sure are nice!

Check out version 0.4 of the Fingering Diagram Builder, or read on for a guide to what’s new and improved.

Read more

Reader email: doubling opportunities

by
woodwinds
Photo, fantail media

A reader emailed me to ask this question (edited):

I was wondering if you could give me some information on what kind of opportunities being a doubler has opened up for you. I am beginning to consider options for graduate school and am looking into multiple woodwinds degrees. Thanks!

I do consider myself to be at the beginning of a hopefully long career, but doubling has already given me some opportunities that I surely wouldn’t have had otherwise.

Doubling isn’t a career that typically leads to fame outside the music business, but within the industry many of the best and best-known doublers are working in Broadway pit orchestras, in the Los Angeles recording studios, or on the road with touring jazz or pop acts.

I haven’t had any of those jobs, nor do I anticipate pursuing any of them at this point. But here are a few things doubling has done for me:

Doubling gigs. These are gigs where I am actually hired to perform on multiple instruments. Most reasonably large cities in the US seem to have at least a few community or school musical theater productions with large enough budgets to pay a professional or semi-pro orchestra, and woodwind doublers are generally in demand (bonus points for double reed players or “low reeds” players). Doubling gigs can also include being hired as a local to play behind a touring show or artist who is passing through town, or being a sort of utility woodwind player for local orchestras, churches, and so forth. Often for me these have been sort of write-your-own-job-description situations, where I’m hired to play one instrument, and later re-hired because I’m able and willing to cover some other parts, too.

Read more

Recital preparation

by

A few of my students have had recitals or other solo performances recently. Besides musical preparation, this is the advice I give: Visualize. If possible, spend time in the performance space before performance day. If not, imagine up a good representation of what the space is likely to look and “feel” like. Mentally walk through the … Read more

Doublers in the news: Hunter Diamond

by

Check out an interview (with audio) of Indiana University undergraduate student Hunter Diamond about his interest in woodwind doubling. He’s hoping his skills on multiple instruments will eventually land him commercial gigs or even a position playing in a pit for musical theater performances. … “The most important thing now is to find something unique … Read more

Breaking: Rico to produce bizarre double-tipped reeds

by

Okay, folks, hang onto your hats: I have stumbled onto what appears to be some truly weird news about things going on at Rico Reeds. I use Google Alerts to keep track of lots of woodwind-related topics on the web. Most days they don’t turn up anything especially interesting, but this morning I awoke to an … Read more

Things you don’t need to cover in woodwind methods class

by

If you are teaching a woodwind methods course, you might be interested in my book.

orchestral flutist
Photo, KSMF Webmaster

I’ve taught college-level woodwind methods courses for a few years now. This is a course primarily for instrumental music majors, who will go on to become school band or orchestra directors, and who need a crash course in the playing and pedagogy of each instrument that will be in their future ensembles. At the places I’ve taught, it means taking students from zero to playing a little bit of flute, oboe, clarinet, bassoon, and saxophone, all in one semester. It’s a semester-long sprint.

There are a handful of textbooks available for these types of courses, most of which I own, and none of which I use in class. I’m continually surprised by the material that is and isn’t covered in these books.

I try hard to keep my courses focused on core concepts, like position/posture, breath support, basic embouchure, voicing, and finger technique, and I try to keep those concepts as simple and clear as possible. I have students observe each other’s playing of these instruments, identify things that don’t look and/or sound right, and put their observations into terms of those basic concepts. (“So-and-so’s pitch sounds unstable, and his embouchure appears to be moving a lot. Perhaps keeping the embouchure still and increasing breath support will help to stabilize his intonation.”)

I find discouragingly little discussion (or even understanding) of these concepts in many of the published texts. Instead, I find what appears to be a lot of filler—not bad information, necessarily, but information that’s far from mission-critical. The students in these classes will mostly end up teaching beginning or intermediate students in large-group settings. They need to understand the fundamentals in ways that will help them problem-solve efficiently.

Don’t get me wrong: I’m certainly not opposed to knowledge for knowledge’s sake. I’m just saying that for an already too-short woodwind methods class, that 300-page book could perhaps be trimmed down to 100 or even 50 clear, concise pages, for significant savings of money, trees, class time, shelf space, and brain cells. Here are some examples of things that I’ve seen in actual classroom-intended woodwind methods textbooks, that just plain don’t need to be there:

Read more