Follow-up: Hercules woodwind stands

A few months ago I did a review of the Hercules DS538B dual-saxophone stand with flute/clarinet and soprano saxophone pegs.

I had some concerns about the stability of my flute on the flute/clarinet pegs, but got some advice in the comments section that the DS602B peg (sold separately) might be better. In the meantime, I’ve gotten to like other aspects of the stand well enough that I decided I needed a smaller version for one-saxophone gigs, so I recently picked up the DS530BB stand, which holds one alto or tenor saxophone and includes no pegs (though it has sockets to accept up to two). Most of my comments in the previous review apply to the DS530BB, so I’ll just provide a couple of photos:

Despite my poor photography, you can gather that it folds up to just over a foot long.
Despite my poor photography, you can gather that it folds up to just over a foot long.

It also includes a bright yellow drawstring bag, and the string makes it a little easier to carry if you’ve already got your arms full of instruments.

The DS602B “Deluxe” peg, which Hercules indicates is for “French/German Clarinets and Flutes,” is quite good. It works for my clarinets and oboe as well as the standard combination pegs that come with the DS538B, and works much, much better for my flute.

I tried to demonstrate the stability difference between the standard peg and the deluxe peg. You can see it a bit in the photos below, but I think I failed to really capture the improvement in the deluxe peg.

Standard peg
Standard peg
Deluxe peg
Deluxe peg

The deluxe peg has the same tapered tip as the standard peg, which, as I mentioned in the previous review, is a definite improvement over a cylindrical dowel-type peg in a quick instrument switch. The peg is also lightly spring-loaded. At first I found this a little weird—if my aim isn’t perfect, I end up compressing the spring a bit, moving the tip of the peg while trying to situate the flute. But after getting used to it a little, I think it actually works pretty well, and actually gives me a little more leeway if I’m trying to get the flute onto the stand in a hurry. The spring-loading also ensures a secure fit for conical woodwinds with a variety of (small) bores, and it actually creates a subtle, appealing effect that my oboe is just slightly jumping into my hand when I take it off the peg.

spring-loaded

The deluxe peg’s better stability seems to come from a wider base element on the peg that presumably is designed specifically for securing flutes, and the fact that the peg stays wider farther up its height.

peg comparison
Typical flute bore at footjoint is 19mm

With the dual-saxophone stand plus the single-saxophone stand, plus the double stand’s included flute/clarinet combo pegs (2) and soprano saxophone peg, plus the deluxe peg, I’m pretty well set for quite a few playing situations. At the time of this writing, total street price for all three is about $120.

Similar Posts

  • Buying a new instrument for college-level study

    If you are preparing to start a college music degree, you may need or want a new instrument. I strongly suggest that you contact your professor before making this purchase. Every professor is of course different, but here are some things that you are likely to discover in most cases:

    Photo, Andrew Shieh
    Photo, Andrew Shieh
    • The professor will be happy and relieved that you are seeking their advice before making a purchase, and will be anxious to work with you on finding the right instrument. They have seen previous tragedies involving students arriving on campus with new, expensive, and totally unsuitable instruments.
    • The professor will likely encourage you to start the semester with your current instrument, even if it’s not really college-worthy, so that you can take the necessary time to pick out a new instrument together. The professor will in many cases want to try out instruments with you to help you pick out the very best one.
    • The professor in many or most cases will have a variety of suitable makes and models in mind, including some (relatively) budget-friendly options. They are likely to have a favorite—probably the model they play on themselves—but will likely concede that the same instrument is not suitable for every single musician. Still, some may require a specific model.
    • Serious college study will require a professional-grade instrument. If you are window-shopping at a music store or online retailer, you can likely assume that anything marked “student” or “intermediate” will not be adequate for the rigors of college study. On the other hand, be aware that not everything labeled “professional” by the seller is high-quality enough for true professional use, even if it’s that maker’s top-of-the-line model. Additionally, instruments that were genuine professional models several decades ago might not be considered such anymore.
    • You may need to prepare yourself for some sticker shock. Depending on your personal financial values, it may be appropriate to use student loan funds to cover this educational expense.
    • The professor’s opinions may not jive with your opinions, the opinions of your old private teacher or band director, or opinions you read on the internet. Be prepared to learn your professor’s way for now, and make better-informed decisions on your own after graduation.

    The same advice holds true for mouthpieces and other paraphernalia. Have a great semester!

  • Hercules stand clip modification

    Disclosure: As an Amazon Associate I earn from qualifying purchases, at no cost to you.

    I made a small modification to my Hercules instrument stands so I could clip them onto my instrument cases for easier carrying.

    The stands all have this same yellow sort of teddy-bear-head piece on the bottom:

    Remove the nut from the center of the bear’s forehead:

    I bought a handful of these. They are almost the right thing for the job:

    …but they don’t quite fit: the holes are too small. The metal seemed fairly soft and not too thick, so I managed to open up the holes a bit with a handheld drill and a 1/4″ wood-drilling bit. It would probably be safer and more precise to use a drill press and a proper metal-drilling bit.

    Or, even better, can anyone recommend a premade part with two 1/4″ (65mm) holes about 1″ (3cm) apart, no thicker than about 1/16″ (1mm), preferably without sharp corners?

    Anyway, with the holes slightly enlarged, put the part in place and replace the nut.

    Add a small carabiner.

    Done:

    This worked well on all my Hercules stands, with a minor modification for the bassoon/bass clarinet stand. The “forehead” bolt was too short to get the nut back on with the extra piece in place, so I installed it off-center. It works fine.

    I’d be curious to hear about your favorite equipment modifications in the comments.

  • Review: “So You Want to Play in Shows…?” by Paul Saunders

    I got a review copy of So You Want to Play in Shows…?, a new woodwind doubling etude book. The author, Paul Saunders, is a woodwind player in London’s West End.

    The book includes seven studies for doubler playing flute, clarinet, and alto saxophone. It also includes a piano accompaniment book, with piano part recordings included. This is an elegant solution to one of the problems of woodwind doubling etudes: how do you enforce quick instrument switches? Chris Vadala’s book provides rests and trusts you to observe them. Gene Kaplan’s duo book pairs you with another woodwind doubler. Saunders’s book, used with the recordings, provides a simple way to work out quick switches alone in a practice room. (For a real-world challenge, cue up the recordings in a playlist, and sight-read the book beginning to end with no breaks between etudes.)

    Saunders’s tunes are fun and musically satisfying—to my tastes, the best among the doubling etude books so far. Styles are what you might find in contemporary rock/pop-based musical theater. Here is a quick-and-dirty demo of etude #3, “How Cool Can You Be:”

    Mr. Saunders emphasized to me that the etudes are intended for aspiring woodwind doublers, and therefore are of moderate difficulty. I would say So You Want to Play is not as challenging as the Vadala book, comparable overall to the Kaplan book. The most technically-demanding material nearly always falls to the clarinet. The flute parts tend to stay in a comfortable register, rarely breaking into the third octave, and maxing out at a high G. There is a note or two of saxophone altissimo. There are frequent instrument switches, a few of them very quick.

    Mr. Saunders was also kind enough to send me early drafts of some a couple of etudes that will appear in a forthcoming second volume. They appear to be more difficult, with some swing feel and doubles on soprano and tenor saxophone.

    As I’ve mentioned in reviews of previous materials, I wish there were more resources available for doublers that included the double reed instruments and/or auxiliary instruments. But, as you may know, double-reed doubling is less common in the West End than it is on Broadway, so this book is probably a good fit for most British woodwind players (like Mr. Saunders), and quite a few American ones. So You Want to Play is a solid addition to the flute/clarinet/alto materials available, challenging but fun for an up-and-coming doubler.

  • A few thoughts on the new Roland Aerophone AE-10

    To be fair, I haven’t tried out the new electronic wind instrument from Roland, and probably won’t bother. (Unless you’re out there, Roland, and want to send me a review unit to change my mind?)

    Don’t get me wrong: it’s great to see another company get into this space, and I hope they will seek to innovate further in wind controllers and push other companies (Akai, Yamaha) to do the same. But Roland’s new Aerophone AE-10 seems like a misstep.

    n06_0352

    Much of the promotional material gushes about how “innovative” the instrument is, but there doesn’t seem to be much to support this claim—it is essentially a very similar instrument to the Akai EWI series or Yamaha WX series, both of which have been around for decades. In implementation and marketing, it really reminds me more of the Casio DH—a novelty for casual playing, not a serious instrument in its own right.

    Roland brags about the familiarity of the AE-10’s fingering system: “most digital horns make you master a new fingering system, which can be a major setback…” This positions the instrument as a toy: something saxophonists can pick up and play immediately without having to pay any additional dues. This unfortunately seems to be embedded in the philosophy of the AE-10’s fingering system: fully embracing the limitations of a real saxophone, while missing an opportunity to solidify wind controllers as viable instruments in their own right.

    The AE-10’s faithfulness to “real” saxophone fingerings extends to, for example, palm keys. Why do saxophones have palm keys? Certainly not for agility or comfort—palm keys are a significant technical issue for saxophonists. They are Sax’s 1840s solution to the problem of needing to locate tone holes at certain places on the instrument’s body. An electronic instrument has no such constraints: the keys can be literally anywhere on the instrument. (The Akai EWI series does a better job of balancing familiarity with innovation.)

    Additionally, the keys appear to move, and to do so in a rather noisy, clicky way. I don’t expect the noise is enough to really be a problem in an amplified situation, but it seems cheap and sloppy—not up to the standards a professional woodwind player demands. (And it strikes me as a very fixable problem on Roland’s end.) Beyond that, I’m not sure that moving keys really make much sense on this kind of instrument. I find the Akai EWI’s motionless keys to be very comfortable and intuitive, similar in touch to playing a recorder or simple-system flute. It’s a very free, agile feeling compared to the relatively clunky mechanisms of a keyed instrument. Why unnecessarily introduce moving parts?

    Also from Roland’s website: “There’s nothing worse than a studio session grinding to a halt because you need an instrument that you haven’t brought along. That won’t happen with the Roland Aerophone AE-10, which gives you a variety of additional acoustic instrument sounds like clarinet, flute, oboe, trumpet, violin, and more…” I suppose the AE-10 is being marketed here toward unprofessional studio musicians, who happen to be working on low-quality projects that will tolerate substitution of a synthesized sound when the musician fails to bring the needed instruments?

    Speaking of which, most of Roland’s promotional materials surrounding the AE-10 seem to focus on its sounds that imitate “real” instruments (“Choose from alto, tenor, soprano, and baritone sax types that all respond just like their acoustic counterparts…”). But the videos are unconvincing. The saxophone sounds, as usual for an electronic instrument, seem especially unsatisfying—a poor choice for a product that seems to be aimed at the saxophonist market. (My preference is to use wind controllers for “synthy” sounds rather than imitative ones, and the AE-10 does seem to include some.)

    The AE-10 does boast some nice but ultimately minor features that I wouldn’t mind having on my Akai:

    • Fingerings are, to some extent, user-programmable (though still not as flexible as the Akai’s EWI fingering mode).
    • An onboard speaker, which seems convenient for practicing. (Roland doesn’t pretend it is usable in a performance situation.)
    • A line-in jack, again probably useful mostly for practicing.
    • A number of handy user-customization settings.
    • It comes with a case.
    • The “Brass section” setting makes it easy to layer sounds.
    • The “Full range” setting automatically switches to different saxophone sounds depending on tessitura. I was unable to determine whether this setting is specific to the saxophone sounds, or whether it is programmable. Could be handy to have several sounds on tap depending on the octave.

    The AE-10 seems to be priced in roughly the same ballpark as the Akai 4000S/5000 and Yamaha WX5. (Bear in mind that the Yamaha requires an external sound module at extra cost, while the Akai and Roland have some sounds on board.) My take: spend your money elsewhere.

  • Essential saxophone recordings: A work in progress

    Seminal Early Concert Soloists

    Mule, Marcel

    Marcel Mule: Le Patron of the Saxophone (Clarinet Classics, compilation 1996)

    Marcel Mule: Le Patron of the Saxophone: Encore! (Clarinet Classics, compilation 2000)

    These compilations also feature recordings by the Mule Saxophone Quartet.

    Wiedoft, Rudy

    Kreisler of the Saxophone (Clarinet Classics, compilation [year?])

    Leeson, Cecil

    Rascher, Sigurd

    Regrettably, recorded performances by Sigurd Rascher and Cecil Leeson are not currently in print. Important out-of-print recordings include Sigurd Rascher Plays the Saxophone, volumes I and II, formerly published by Grand Award, and The Art of Cecil Leeson, volumes I-VII, formerly available on the Enchante label. Read More “Essential saxophone recordings: A work in progress”

  • Review: Ben Britton’s A Complete Approach to Sound for the Modern Saxophonist

    I have been in touch with saxophonist Ben Britton since I mentioned his blog in a roundup review last year. He’s a nice guy, not to mention a great (and award-winning) saxophone player:

    I was pleased to hear from Ben about his new book, A Complete Approach to Sound for the Modern Saxophonist. It is now available in print from Amazon (currently a very reasonable $14.95) and as a download from Payhip (a steal at $9.95).

    The book is around 60 pages long, but it’s not densely packed text. It can easily be skimmed in one sitting. What you get for your money is a highly-concentrated, efficient approach to tone production. I (and probably you) have shelves of much longer and much more expensive books that take a week to read and longer to extract anything useful from. Ben’s book is a straightforward, less-is-more approach that is refreshing and worthwhile.

    My copy arrived just in time, as my tenor hasn’t been getting enough attention lately (teaching classical repertoire means lots of alto) and, as I feared, my tone and control have suffered a bit. I soaked some reeds and spent the morning with the book. Read More “Review: Ben Britton’s A Complete Approach to Sound for the Modern Saxophonist”

One Comment

  1. Good review, Bret! I use the Hercules single stand, and my only complaint is that the adjusting hold arm tends to loosen and slide from time to time (I carry a set of hex wrenches, and a 7mm wrench in my bag just in case.) I haven’t used the Hercules stand pegs, but I do use the stand-alone flute peg. The base is a little wide, but it’s thin enough to make it work even in a tight space!

Leave a Reply

Your email address will not be published. Required fields are marked *

Comments that take a negative or confrontational tone are subject to email and name verification before being approved. In other words: no anonymous trolls allowed—take responsibility for your words.

This site uses Akismet to reduce spam. Learn how your comment data is processed.