Here, once again, are my required recordings for the new semester. These are recordings I select each semester for my university students, a different one for each instrument (I teach oboe, clarinet, bassoon, and saxophone), so that over the course of their degree program they build up a collection of great players playing great repertoire.
I mentioned in my recent review of the new Rico Reserve clarinet mouthpieces that Robert Polan, Rico Product Manager, was shipping me a few additional samples for comparison. I received three X5 mouthpieces this week, and I have been inspecting and playing them side-by-side with each other and with the one X5 from the original shipment. … Read more
Exercise has always been a challenge motivation-wise for me, but now that being over 30 appears to be a chronic condition, it’s something that I’m trying to do better about. I find it easier to motivate myself to practice my instruments, but I see connections between my exercise aversion and some of my students’ practice … Read more
I was pleased to hear from a representative of Rico about their new “Reserve” clarinet mouthpieces, which they seem to be promoting very heavily and which are generating some buzz (no pun intended) among curious clarinetists. She was kind enough to send me a few to check out for myself and to review here, and to put me in touch with Robert Polan, Rico Product Manager, who answered some of my questions during the process.
Initial observations and thoughts
The mouthpiece is currently available in three models. Rico sent me one of each:
X0 (which has a 1.00mm tip opening)
X5 (1.05mm)
X10 (1.10mm)
I’m a fan of connecting model numbers to actual relevant measurements, as Rico has done here, rather than assigning seemingly arbitrary codes (take note, Vandoren), though of course the tip opening is only one of many measurements that affect a mouthpiece’s playing characteristics. Dave Kessler speculates that we might see some larger tip openings from Rico in the future, but it does seem that Rico has boxed themselves in on any smaller openings with this naming scheme; naming the mouthpieces something like X100, X105, and X110 might make more sense if future offerings were to include a sub-1.00mm tip opening (X095, etc.). Mr. Polan responded noncommittally to my question about future offerings:
Since the product is so new, it’s too early to know which additional models clarinetists will want. We are carefully evaluating the response to these three models in order to determine what is next.
Mouthpiece diagrams on boxes
The boxes’ design includes some faux-technical-drawings of the mouthpieces—which I initially thought was a cool touch, showing the precise dimensions of the mouthpieces—but the drawings are actually identical on the different models’ boxes, so they are probably mostly decorative.
The mouthpieces themselves are etched with the text “Reserve Rico,” a six-digit serial number (the first three digits are zeroes at this point), the model number (such as “X5”) and additional numeral 2 (I don’t know what the 2 means, and I couldn’t seem to get a response to my question about it). It seems a little unusual to see a serial number on an inexpensive, mass-produced mouthpiece (the Reserves seem to be going for a street price of about $100). I asked Robert Polan about this, and his response was:
Adding a serial number was an important feature for us. We are planning to offer online tools and future promotions for Reserve mouthpiece owners who register their mouthpieces on a soon-to-be released “Owners Area” on our website. Again, more to come on this in the coming months.
Serial number
Model number, and mysterious “2”
The mouthpiece is also bedazzled with a painted-on dullish-silver “R” logo on top, which I expect will wear off quickly; I think it would be a classier (and more permanent) touch to etch the logo. I am pleased to see the other identifying information etched into the mouthpiece; my old Vandoren mouthpieces get difficult to tell apart once the painted model numbers wear off. The Reserves also have the usual latitudinal lines which can be used to gauge ligature position.
One of Rico’s big claims about the Reserve mouthpieces is the extreme precision with which they are made, using a process of milling, or carving, the mouthpieces out of solid material, rather than pouring liquid material into a mold. In fact, Rico touts “Zero handwork for maximum consistency” as a feature of these mouthpieces. This seems like a daring choice; in the past, I’ve always seen mouthpiece makers anxious to point out the hand-finishing of their mouthpieces. Rico’s implication seems to be that other mouthpiece makers use hand-finishing because their manufacturing tolerances aren’t exact enough without it, and that Rico has found a way to improve those tolerances to the point that they can eliminate the extra step, cut costs, and take potential human error out of the picture. Mr. Polan clarifies:
Using the CNC technology to fully machine the Reserve mouthpiece allows us to control consistency to a very high level, resulting in greater repeatability than with hand-finishing. This is especially true with high volume production. One of the smartest operations experts I know once put it to me this way: “When you ask a human being to perform a task repeatedly, he or she will get it right on average about 80% of the time.” While a mouthpiece craftsman like Lee Livengood can no doubt produce results that rival our machines, finishing hundreds of mouthpieces a day would make maintaining repeatability challenging for even the most skilled hand-finisher. Considering that many competitors’ mouthpieces in the Reserve price range are finished by factory workers, most of whom do not even play clarinet, the attention to detail with the finishing steps is not the same as it is with someone like Lee Livengood, nor does it come close to matching the consistency we achieve with the Reserve mouthpiece.
[Ed. note: Lee Livengood is a clarinetist with the Utah Symphony, a mouthpiece maker, and a past president of the International Clarinet Association, and a technical consultant to Rico on the development of the Reserve mouthpieces.]
Rico claims that they can machine-mill mouthpieces to tolerances of 0.0005″. Kessler suggests that Rico is perhaps stretching the truth with this claim; when I mentioned this, Robert Polan responded:
Regarding the question about our machining tolerances, we are indeed holding tolerances as tight as .0005” in areas of the mouthpiece that require that precision. We do not claim to hold .0005” with every dimension; that would be both costly and unnecessary. But we are holding to that tolerance where it counts. Ultimately the player will judge any claims about tolerances and quality. We did our homework with the Reserve mouthpiece and we are confident it stands up to the most discerning players.
It’s fair to point out that I don’t really have a concept of what kind of tolerances are necessary for mouthpiece making, but, on close visual inspection, the precision of these mouthpieces does indeed appear very impressive. The rails and tips appear to my eye to be very, very symmetrical and even. This is something that I definitely haven’t seen in mass-produced mouthpieces before. Held in the right light, the tables reveal some visual evidence of the tooling process: some subtle lengthwise lines. However, the tables feel glassy-smooth to the touch.
I mentioned that it would be interesting to compare several of the same model and see if any variation could be spotted with the naked eye (my bet is: not much). Mr. Polan immediately offered to send me several more to compare, commenting:
We don’t claim that every mouthpiece we make is identical; offering identical measurements is impossible. We do, however, feel confident that there is a noticeable similarity between every mouthpiece we make, thanks to the control in our process. As Richie Hawley put it when we had him test our consistency, the Reserve mouthpiece has a “comfortable and predictable similarity” from one to another.
Though demand for the mouthpieces has delayed getting the additional mouthpieces to me (I understand Rico is currently backordered by 5oo units), I think it speaks to Rico’s faith in their product that they are willing to offer samples up for side-by-side scrutiny. I will post a follow-up when the additional mouthpieces arrive. [Update: read the follow-up here.]
The proof is in the playing
But of course the real question on everyone’s mind: how do they play? I’ve been playing the Reserve mouthpieces over the last few weeks.
I’ve ranted about this previously, but since we are heading into a new school year, I thought it might be worth covering again and in more detail. Some beginning band programs kick off the year by allowing prospective students to “try out” the various instruments, ostensibly to determine which instrument they have the most natural … Read more
I recently met a fellow woodwind player, and the conversation inevitably turned to gear. We had each recently tried out an instrument by a relatively new maker. My new acquaintance found it not to his liking. “I’m a _____ snob,” he proudly explained, naming a very popular and well-established instrument maker. I also recently read … Read more
I love getting good questions by email: I have a question about maintenance on your doubles. Once you feel like you have a good foundation and can play them at a high level, how do you maintain that in your practice routine? There’s no great answer to your question. Playing one instrument “at a high … Read more
I recently got email from a reader about the use of Chinese woodwinds in theater and film music. I did my best to answer his questions, and I’m posting them here in case they are of use to anyone else. Both questions and answers are edited here for length and awesomeness.
My question for you is about bamboo flutes. I see the term bamboo flute thrown around (such as in the reed 1 book for Aida) and I wonder what exactly that means. Do those musicians own 12 bamboo sticks with holes drilled in them, or do they use a specific style of bamboo flute from a particular part of the world?
If the part calls for “bamboo flute” with no other clarification, I think that leaves it pretty well open to interpretation by the flutist and musical director. Aida is set in the Old Kingdom of Egypt, where, according to my Wikipedia research, bamboo per se did not grow. Probably the best-known bamboo-ish Egyptian flutes are neys, made from bamboo-like reeds.
My guess is that most woodwind players would substitute some variety of bamboo transverse flute, such as an Indian bansuri, a Chinese dizi (perhaps with the buzzing membrane replaced by a piece of tape), or a non-culture-specific bamboo flute like those sold by Erik the Flutemaker. Doug Tipple’s PVC flutes make an excellent and economical substitute for bamboo, with nice tone (I dare you to hear the difference) and consistent intonation and response. You might be able to contact musicians who have worked on specific shows, and find out what solutions they came up with; the Internet Broadway Database is a good starting point.
Your listing for The Lion King is much more specific, which brings me to my next question: dizi keys. I happen to be in China right now. Tunable dizi flutes are cheap, and one-piece dizi are cheaper. Do I need 12 tunable dizi? What keys are actually played in theater and film in the US?
Bill Plake wrote a nice blog post earlier this week, sharing a simple tip about using sticky notes to break bad habits. (Bill’s posts are excellent—make sure you subscribe in your favorite feed reader.) The tip he shares is similar to something I do during final performance preparations: I jot two or three key reminders … Read more
In general, I’m not that concerned about keeping fingers close to instrument keys. A lot of woodwind players and teachers seem to believe that “close” fingers mean more speed, which I haven’t found necessarily to be the case. To me, a much larger factor is tension: if my fingers are tense (because, for example, I’m trying really hard to keep them close to the keys), they move more slowly.
But when I work with beginning clarinetists (whether first-time instrumentalists or doublers), many of them seem to have a great deal of trouble with squeaks and with notes responding sluggishly—problems that I think in most cases can be traced to fingers not completely covering toneholes, or not covering them in a synchronized way. And one of the major reasons that this happens is that the fingers are too detached from from the keys. It’s not a question of distance, per se, but one of awareness.
One reason this is such an issue for clarinetists in particular is that so many fingers have multiple jobs. The left thumb operates a tonehole/ring and a key, which must sometimes be pressed individually and sometimes together. The left index finger has a tonehole/ring and two keys. The right index finger has a tonehole/ring and four “side” keys. And the pinky fingers have responsibilities exceeded only by the bassoonist’s thumbs. Throw in a couple of sliver keys, and you’ve got a lot of fingers constantly in transit from one key to another.
