I’m a little late to the party on this, as the ReedGeek has been around for a number of years now and has been widely reviewed, but I finally picked one up (at ClarinetFest) after a long conversation/demonstration with inventor Mauro Di Gioia. I have been using mine for a few months now and wanted to add a few points to the conversation. Here is my take.
The ReedGeek isn’t completely replacing my traditional reed tools, but, I am using it for some of the tasks that I used to do with those tools:
- Flattening the backs of single reeds. This seems to be what the ReedGeek does best, and it is now my go-to tool for this procedure (by far the most frequent adjustment I make to my clarinet and saxophone reeds). I used to do this with wet-dry sandpaper on a piece of glass, and with flat files prior to that. Using the ReedGeek is faster and neater, doesn’t remove as much cane unnecessarily, and leaves a nice smooth non-shredded finish even on wet cane. I had also experimented in previous years with using knives for flattening, which is fast and leaves a nice finish but is risky because it’s so easy to gouge out chunks of cane by accident. The ReedGeek is much safer.
- Smoothing out oboe reed windows. I still like my double-hollow-ground knives for carving out oboe reed windows, but I do have a tendency to leave the windows a bit rough and craggy (like from knife chatter). That’s fussy and time-consuming to fix with a knife, and if not handled delicately a knife can actually exacerbate the problem. But the ReedGeek cleans up my windows pretty quickly and easily, with much less risk of making the gouges worse. I mostly use the squared-off end for this.
- Scraping bassoon reed channels. The concave parts of a bassoon reed blade are all but impossible to get at with a straight knife, and I find round files or sandpaper to be only a little less clumsy. The ReedGeek’s slightly curved tip works very well for this. Mr. Di Gioia describes this as being similar to using a pencil eraser—you just “erase” the cane you don’t want.
I’m not currently using the ReedGeek for:
- Balancing the corners of the tips of single reeds, though it certainly can be used for this. I’m still used to sandpaper and glass, which at this point feels more controlled to me. If I have both tools available I still grab the sandpaper but if I’m away from my reed desk and traveling light, the ReedGeek will do the job. The ReedGeek can, I think, be used effectively to target specific spots on a reed’s profile (using either the square or the curved end), but I personally do very little of that.
- Double reed making. (It’s fair to point out that the ReedGeek isn’t exactly being marketed as a tool for this anyway, though the company does publish a document on its website that provides some instruction for double reed players.) For one thing, the ReedGeek is quite small, and for reedmaking I like big, chunky, comfortable knife handles. A handle would also get my hand out of the way, which was a problem for me when I tried to use the ReedGeek for some fine tip work on oboe reeds—it was hard to get everything angled so I had control and could see what I was doing. I spoke to Mr. Di Gioia on the phone while preparing this review, and he hinted at a soon-to-be-revealed, more double-reed-oriented version of the ReedGeek, with some kind of extension for increased leverage (though he shied away from calling it a “handle”), and with scraping surfaces tailored more for double-reed applications. Because of the ReedGeek’s extremely hard alloy, it may be tougher on reed plaques than a traditional knife, but if you’re planning to use the ReedGeek in that way, the price difference between the ReedGeek and a good knife will buy you dozens of plaques.
The ReedGeek is very portable, won’t be confiscated at an airport security checkpoint, and doesn’t need sharpening like a knife or replacing like sandpaper. (When I spoke with Mr. Di Gioia he joked that he has to hope that people lose them so they will have to buy more.)
The ReedGeek has a hole drilled though one end (visible in the oboe reed picture), which I thought might be a way to attach some kind of handle, or perhaps to put it on a lanyard or keyring. In my follow-up call with Mr. Di Gioia, he explained that the hole has to do with the ReedGeek manufacturing process, and that keeping the ReedGeek on your keyring would likely damage your keys as it is much harder than the metals keys are made from. Also, the ReedGeek’s edges feel sharp to me, but not really in such a way that I would cut myself on them; Mr. Di Gioia recommends handling it with care but isn’t aware of people injuring themselves with it. He has an idea for a sleeve or sheath that may become available at some future date, and that could make carrying the ReedGeek in your pocket more feasible.
The verdict: for me, it’s useful and I will easily get my money’s worth out of it as long as I don’t lose it. For a single-reed player, I think it can realistically replace most or all of your tools. For a double-reed player, it’s currently a supplementary tool at best, but stay tuned for a possible new product.
At the time of this writing the ReedGeek goes for right about $50 from the ReedGeek store; some retailers also carry it.